
The first step from manual ski service to automation
Specially for workshops that previously worked with manual machines, we have developed the CRYSTAL ONE. With 4-fold VARIO structures, stone grinding takes place on a 160 mm or 180 mm wide stone. The side edges are ground with sciolinamic belts guided over sliding shoes. Subsequently, High Tech Tuning (HTT) ensures the best and most consistent MONTANA CRYSTAL GLIDE FINISH quality.
A combined unit for stone grinding and tuning automates these work steps, thereby reducing the amount of personnel required. This makes the CRYSTAL ONE extremely space-saving, safe and economically highly interesting. Thanks to its short overall length, the robot fits into even the smallest workshop.
Skiservice robots from MONTANA are above-average in robustness, quality and durability. The machines are equipped with stable, easy-to-use software that allows you, among other things, to create, grind and adjust your desired structures over and over again. Our tested VARIO structures are already integrated.
Each service robot also grinds cross-country skis. High performance, low consumable costs and sustainable technology promise a long service life as well as a high resale value.
Radial tuning
With the MONTANA Radial Tuning, the skis become much more turn-friendly - in particular, the edge grip under the binding is thus even better. So that the edges hang off more, the skis are tuned more in the wider area, i.e. in the shovel and tail area. In the binding area, the tuning is done at a lower angle. This results in a perfect edge angle that is adapted to the curve.
The first step towards automated ski service
- developed for workshops that previously worked manually. Extremely space-saving, requiring less personnel, safe and highly interesting economically.
Advantages
- PowerVac vacuum system for suction of all ski surfaces
- Automatic stone grinding for 1 ski with pressure curve
- 4-fold VARIO structures
- Double-sided edge grinding with pressure curve
- Surface High Tech Tuning (HTT) of the edges
- RADIAL tuning via splitter
- Lowest overall length
- Ready for "MONTANA Digital World"
Technical data
Machine
Power: | max. 7 kW |
Voltage: | 3 x 400 Volt / 50/60 Hz, special voltage via transformer |
Fuse: | 3 x 30 A |
Stone width: | 160 or 180 mm | Stone speed | 300 - 1.900 rpm |
Cutting speed: | 6 - 32 m/s |
Compressed air: | min. 6 bar, 1,100 l/min |
Total weight: | 1,900 kg excl. emulsion |
Convinced?
Whether yes or no - get in touch with us. Our service team will advise you in any case.
