With the unique MONTANA High-Tech Tuning (HTT) system, the steel edges on the base side are tuned in a lightly hanging form at an angle of approx. 0.5°- 0.8° and finely polished.
The specially developed tuning stones are set at a precisely defined angle with the dressing tool.
Tuning pressure curve
The contact pressure can be varied in 10 segments to allow particularly even tuning. Reducing the pressure (e.g. in the bindings area) has proved to be worthwhile.
With this special process, the skis are more strongly tuned in the wider areas, i.e. at the tips and tails, so that the edges hang more noticeably.
In the bindings area, the edges are ground to be less hanging. In this way, the edge angle varies over the entire length of the ski, but is optimally aligned with the width of the ski. Through Radial Tuning, the skis and snowboards are noticeably easier to turn and the edge grip under the bindings is improved considerably. The skier/boarder can interrupt a started curve at high speed without the worry of falling.